Safety 1st Advancer Manual del operador descargar pdf (Pagina 128)

Environmental Remediation Drilling

Safety Guideline

Page 128 of 132

Attachment 4.B - Drill/Direct Push Type Rig Inspection Checklist

SITE/PROJECT NAME: ________________________________________________________

RIG INSPECTOR (NAME/CO.): __________________________________________________

RIG INFORMATION:

Rig Type: Rotary/Auger Drilling Rig Direct Push Type (DPT)

Owner: __________________________

Yr/Make: __________________________

Model: __________________________

VIN #: __________________________

Mileage: __________________________

Drill Hrs: __________________________

Inspector to initial columns below as appropriate

CATEGORY INSPECTION ITEMS PASS FAIL N/A ACTION

NEEDED

Emergency

Switches

Kill switches are located and accessible to workers on both sides of the

rotating stem. NOTE: Location and number of switches depend on the rig

manufacturer, please refer to owner's manual (DPT typically has one

switch on control panel).

Kill switches installed by the manufacturer are verified to be in operable

condition and all workers are familiar with the location and operation of

these switches. NEVER BYPASS, DISABLE, OR REMOVE KILL

DEVICES.

Protective

Guards

Drive shafts, belts, chain drives, and universal joints are guarded to

prevent accidental insertion of hands, fingers, or tools.

Cables

Cables on drill rig are free of kinks, frayed wires, birdcages, flat spots,

grease, and worn or missing sections.

Cables are terminated at the working end with a proper eye splice; either

swaged, coupled, or using cable clamps.

Cable clamps are installed with the saddle on the live or load side.

Clamps are not alternated and are of the correct size and number for the

cable size.

Wire ropes are not allowed to bend around sharp edges without cushion

material.

Pulleys

Pulleys are not to be bent, cracked, or broken.

Pulleys operate smoothly and freely, without resistance.

Cable Winches

Motor is mounted in correct location and tightly secured to drill rig.

Winch is capable of being placed in the free spool (unwind smoothly) and

locked position correctly, demonstrating that the cable is suitable for lifting

during drilling operations.

Safety Latches

Hooks installed on hoist cables are the safety type with a functional latch

to prevent accidental separation.

Safety latches are functional and completely span the entire throat of the

hook and have positive action to close the throat except when manually

displaced for connecting or disconnecting a load.

Flights/Augers

Flights/Augers should not be bent, cracked, or broken. NOTE:

Flights/Augers failing inspection must be removed from jobsite.

Flights should be blunt to prevent the risks of cuts.

Auger keys should not be bent, have any cracks/fractures, be excessively

worn, or otherwise damaged.

Auger bolt holes and threads should not be damaged.

1 2 ... 123 124 125 126 127 128 129 130 131 132

Comentarios a estos manuales

Sin comentarios

Safety 1st Advancer Manual del operador Pagina 128

Comentarios a estos manuales

Relacionado con productos y manuales para Cochecitos Safety 1st Advancer