Safety 1st Advancer Manual del operador descargar pdf (Pagina 93)

Environmental Remediation Drilling

Safety Guidelines

Page 93 of 132

4.16.10 – Work Area Monitoring cont.

• When moving equipment consider the following:

o Avoid wearing loose or baggy clothing.

o Wear appropriate PPE including leather gloves.

o Wear appropriate PPE including gloves, goggles, Tyvek suit, respirator, rubber boots, or

splashguard when handling contaminated materials as detailed in the health and safety plan.

o Upgrade PPE as site conditions change and additional PPE is warranted.

• When handling sharp sampling tools:

o Use correct tools for opening soil sleeves.

o Cut away from body when opening sleeve or cleaning soil cores.

o Always use a sturdy surface when cutting and handling soil cores.

o Consider using a carrot peeler or metal putty knife in lieu of knifes while preparing and cutting

soil samples.

Avoid sample cross contamination by:

• Decontaminating or disposing of sampling equipment between sampling locations.

• Double-checking sample labels to ensure accuracy and adhesion to containers.

When performing standard penetration test, consider the following:

• Split barrel samplers should be inspected daily for excessive wear to threads or bowing of split-tube halves.

• Keep the ball check free of debris to ensure proper operation.

• Keep hands away from the bottom of the sampler when removing it from, or inserting it into, the casing or

augers.

• When using pipe wrenches to disassemble the sampler, put yourself in a stable position, and place hands

and fingers such that they will not be smashed between the handle and the ground.

• Inspect 140 lb Safety Hammer daily for cracks or excessive wear to the hammer body, top bail, or threads.

Do not hold on to the sampling rods while operating the hammer

• Do not use hands to manipulate the own hole hammer when transferring it to vertical use.

• Inspect inner workings of the automatic hammer regularly and lubricate lifting mechanism(s) often.

When conducting Shelby Tube Sampling, consider the following:

• Use the correct size socket-head bolts.

• Keep the ball check free of debris to ensure proper operation.

• Pull, do not push, the pipe wrench while turning the sampling rods to break the sample free while down

hole.

• Do not use the machine to turn the rods.

• Keep hands away from the bottom of the sampler when removing it from, or inserting it into, the casing or

augers.

• When removing a tube from the head, do not suspend the sampling rods from a slip ring.

1 2 ... 88 89 90 91 92 93 94 95 96 97 98 ... 131 132

Sin comentarios

Safety 1st Advancer Manual del operador Pagina 93