Safety 1st Advancer Manual del operador descargar pdf (Pagina 53)

Environmental Remediation Drilling

Safety Guidelines

Page 53 of 132

4.5.2 - Housekeeping On and Around the Drill Rig cont.

The first requirement for safe field operation is that everyone understands and fulfills the responsibility for

maintenance and housekeeping on and around the drill rig.

• Suitable storage locations should be provided for all tools, materials, and supplies so that tools,

materials, and supplies can be conveniently and safely handled without hitting or falling on a member of

the drill crew or a visitor, without creating tripping hazards, and without protruding at eye or head level.

• Avoid storing or transporting tools, materials, or supplies within or on the mast of the drill rig.

• Pipe, drill rods, casing, augers, and similar drilling tools should be stacked orderly on racks or sills to

prevent spreading, rolling, or sliding.

• Penetration or other driving hammers should be placed at a safe location on the ground or be secured to

prevent movement when not in use.

• Work areas, platforms, walkways, scaffolding, and other access ways should be kept free of materials,

debris, and obstructions and substances such as ice, grease, or oil that could cause surfaces to become

slick or otherwise hazardous.

• Keep all controls, control linkages, warning and operation lights, and lenses free of oil, grease, and ice.

• Do not store gasoline in any portable container other than a self-closing, non-sparking, red container

with flame arrester in the fill spout and having the word gasoline clearly visible. The container must also

comply with all other hazard communication requirements.

• Dirty or contaminated pipe, drill rods, augers, or sampling equipment, should be moved away from the

work area to prevent possible exposure to non-protected personnel and also to prevent cross-

contamination of clean materials.

• Wastewater and drilling fluids must be properly contained and labeled and stored out of the operational

area.

• The use of additional footing safeguards (mats) should be evaluated on a case-by-case basis.

• Remove and dispose of empty bags or other containers, which have held drilling mud, cement or other

dust producing materials.

• Do not leave items such as hand tools, rakes, shovels, or other small equipment left lying on the ground

to pose a trip hazard.

• Welding gas cylinders should be stored in an upright and secured position. Protective caps should be in

place when the cylinders are not in use.

• Never use compressed air for cleaning clothes.

• All unattended boreholes must be adequately covered or otherwise protected to prevent personnel, site

visitors, or animals from falling into the hole. All open boreholes should be covered, protected, or back

filled adequately and according to local and state regulations or customer requirements upon completion

of the drilling project.

• Walk around, not over, obstacles. Carefully choose a walking path to avoid ruts and steep slopes. Walk

around freshly placed fill, gravel, or rip-rap. Keep your eyes on the path.

• Avoid storing or transporting tools, materials, or supplies within or on the mast of the drill rig.

4.5.3 - Equipment Inspection

• Inspect equipment at the start of each shift (pre-op) and at the end of each shift (post-op).

• Correct all major defects and safety defects prior to the start of work.

1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 131 132

Comentarios a estos manuales

Sin comentarios

Modelos	Tipo de documento
HS190/16	Manual de usuario Philips HS190/24 User manual, 7 paginas
RQ1085	Manual de usuario Philips RQ1075/23 User manual, 52 paginas
HQ6696/33	Manual de usuario Philips HQ6695/16 Benutzerhandbuch, 84 paginas
Total body grooming system	Manual de usuario Philips Total body grooming system, 2 paginas
6940LC/18	Manual Philips 6940LC/18 User manual, 36 paginas
HQ8170	Manual de usuario Philips SHAVER 8000 HQ 8170 electric shaver, 100 paginas
7810XL	Manual Philips SHAVER 7000 SensoTouch 2D Electric razor 7810XL, 12 paginas
HQ8270	Manual de usuario Philips HQ8261/21 Benutzerhandbuch, 192 paginas
RASOIO 6000	Manual de usuario Philips RASOIO 6000, 214 paginas
HQ8170/21	Manual de usuario Philips HQ8170/16 Benutzerhandbuch, 104 paginas
HQ8270/17	Manual de usuario Philips HQ8270/17 Kasutusjuhend [en] , 276 paginas
HP6390/00	Manual de usuario Philips HP6390/00 User manual, 2 paginas
HQ914/15	Manual de usuario Philips HQ914/15 User manual, 20 paginas
HQ7742/16	Manual de usuario Philips HQ7742/16 Kasutusjuhend, 108 paginas
HQ8010/01	Manual de usuario Philips HQ8010/01 Panduan pengguna, 9 paginas
HP6576/50	Manual de usuario Philips HP6576/50 User manual, 12 paginas
HQ7142/40	Manual de usuario Philips HQ7142/40 Benutzerhandbuch, 88 paginas
PQ205/17	Manual de usuario Philips PQ202/17 User manual, 4 paginas
HQ8290	Manual de usuario Philips HQ8290, 276 paginas
HQ7782/16	Manual de usuario Philips HQ7782/16 Panduan pengguna, 136 paginas

Safety 1st Advancer Manual del operador Pagina 53

Comentarios a estos manuales

Philips HS8420/22 manuales

Philips HS8420/22 Manual (8 paginas)

Tabla de contenidos

Más productos y manuales para Máquinas de afeitar para hombres Philips

Safety 1st Advancer Manual del operador Pagina 53

Comentarios a estos manuales

Relacionado con productos y manuales para Cochecitos Safety 1st Advancer

Philips HS8420/22 manuales

Philips HS8420/22 Manual (8 paginas)

Tabla de contenidos

Más productos y manuales para Máquinas de afeitar para hombres Philips